outer bearing
英 [ˈaʊtə(r) ˈbeərɪŋ]
美 [ˈaʊtər ˈberɪŋ]
外（侧）轴承
双语例句
- Product is stabilization, that is the choice in surperfinishing water pump bearing outer ring and spin bearing outer ring.
产品型号稳定是加工水泵、纺织轴承沟道、滚道之最佳选择。 - Under normal operating conditions, the inner raceway, outer raceway and ball bearing load, and separation from the cage for the ball and keep stability.
在正常的运转情况下，内滚道、外滚道和钢球承受载荷，而保持架为钢球起分离及保持稳定的作用。 - Disengage the coaxial cable grommet from the hole in the right cowl side outer panel. shielded ball bearing
从右前罩板外侧孔切断同轴电线保护环。带防护垫圈的滚珠轴承 - The effects of stiffness and strength for outer members on stability ultimate bearing capacity of whole members were studied when the core members had been determined.
在内核构件已经确定的情况下，研究了外围构件的刚度和强度对整体构件稳定极限承载力的影响； - Remove the outer cover of the bearing to see the lubricating oil is normal or not, if the color is not in normal condition, the lubricating oil has to be replaced.
拆下轴承外盖，检查润滑油是否清洁，如发现色泽不匀，即需更换润滑油。 - Press the outer bearing race backwards as far as possible and read the play off the dial gauge.
尽可能远地向后压外轴承座圈，并读取百分表上的间隙数。 - Applying the theory of vibration, this research presents a vibration response model of ball bearing with outer race waviness, analysis the effect of radial gap between the ball and the inner and the outer race to ball bearing vibration character by Matlab calculation program.
利用振动理论建立了外圈有波纹度的轴承振动响应模型。通过Matlab程序计算，分析了轴承间隙对轴承振动的影响特性。 - The results of two models show that the distribution law of stress and strain of bearing and distortion law of outer ring of bearing are identical, which proves that both modeling methods are usable in some extent.
两种模型的分析结果表明：整体应力、应变分布和轴承外环的变形规律基本一致，证明了两种建模方法在一定程度上是可行的。 - Outer Wave Generator Bearing for Transmission Drive
外激波变速传动轴承 - According to the shape and features of fracture face of rivet and inner and outer rings of bearing after failure, the mechanism resulting in bearing failure was analyzed.
根据铆钉断口及轴承内外套失效后的形貌，分析轴承失效产生机理。 - This paper analyses the contact stress between the rollers and the outer track of roller bearing in detail, and then concludes the contact stress of all kinds of the bearing rollers.
本文就三牙轮钻头滚动轴承滚子与外圈之间的接触应力进行了详细的分析，得出各种类型轴承滚子的接触应力分析情况。 - A new kind of bearing for transmission drive outer wave generator bearing is introduced.
介绍了一种新型的变速传动轴承&外激波变速传动轴承。 - The value of the groundwater pressure is an important parameter in the engineering computations for the checkings of the base-plate anti-floatation of building foundation and the outer wall bearing capacity of basement.
地下水压力的大小在建筑物基础底板抗浮验算和地下室外墙承载力验算等工程计算中都是一个很重要的参数。 - Measuring Outer Diameter of Cylindrical Roller Bearing Without Outer Ring
无外圈圆柱滚子轴承外径的测量 - According to the contrast of characteristic frequency and base frequency to carrying out experiments on floating bearings by choosing different outer clearances, the ways for reducing the additional influence of rotor's vibration affected by the outer clearance of floating bearing have been found.
根据特频与基频对照，选择不同外间隙的浮动轴承进行试验，找出了降低浮动轴承外间隙对转子振动附加影响的途径。 - This paper analyzes the features and feasibility of the sealing constructions at joints between frame and endshield, and endshield and outer bearing cap of dust ignition-proof motor.
分析粉尘防爆电机的机座与端盖、端盖与外盖接合处的密封结构特点和可行性。 - Effect of Relative Incline between Inner and Outer Rings On Cylindrical Roller Bearing
内外围相对倾斜对圆柱滚子轴承承载能力的影响分析 - Design of moving mechanism of inspection in robot for outer surface of bearing pipe
承压管道外检测机器人行走机构设计 - Research On Vibration Model and Simulation for an Outer Ring Faulty Bearing Under Variable Speed
变速工况下滚动轴承外圈故障振动的模型与仿真 - This paper analyzes weared cause on bearing sleeve of medium sized high speed motor. Countermeasure for gripping the outer ring of bearing is taken, thus solving the common problem causing vibration of motor and having gained a satisfying effect.
分析了中型高转速电动机轴承套磨损的原因，采取夹持轴承外环的对策，解决了引起电动机振动的共性问题，取得了令人满意的效果。 - And the finite element method ( FEM) was used to simulate the stress and deformation of the outer casing and the bearing chock.
同时对航空发动机燃气涡轮外机匣和轴承座进行了有限元模拟计算，得到外机匣和轴承座的焊接处的强度和变形情况的模拟结果。 - Production of Outer Frame of Linear Bearing
直线轴承外骨架的生产 - The paper also discussed other important problems, such as machining and testing of ceramic balls, inner and outer rings of the bearing as well as structure design of ceramic ball bearing.
文章讨论了陶瓷材料的选择、陶瓷球和内外套圈的加工与检测、以及陶瓷球轴承的结构设计等重要问题。 - Cepstrum analysis was used in the experimental data analysis. At first, the outer ring of bearing fault signals analysis process was compared with the normal bearing signal to expatiate the cepstrum analysis in actual operation process.
首先通过轴承外圈缺陷故障信号与无故障信号分析过程的比对来详细说明倒频谱分析法的实际分析过程。 - There exist a great variety of annular-shaped members having symmetric topology in engineering applications such as the rotor/ stator of motor, the ring gear/ hollow sun gear of planetary gears, and the inner/ outer ring of rolling ball bearing.
工程领域存在一类外形对称的环状构件，例如旋转电机的定/转子、行星传动的内齿圈/空心太阳轮和滚动轴承的内/外圈等。 - Which the outer spindle is a hollow structure, and the inner spindle is located in the outer spindle; the outer bearing is located in the box, and the inner bearing is located in the outer spindle.
该系统为外主轴采用空心结构，内主轴位于外主轴内；外轴承紧固于壳体内，内轴承嵌于外主轴内壁。 - According to the differences of the inner bearing structure in function mechanisms, the coupling process of the inner and the outer bearing structure is divided into two stages, the support principles and methods of each stage are proposed. 6.
根据内承载结构作用机制的差异，将内、外承载结构耦合过程分为两个阶段，提出了每个阶段的支护原则和支护方法。 - A stabilization condition of the outer bearing structure and surrounding rock is put forward, based on which the mechanism that the inner bearing structure makes the outer bearing structure stability is discussed.
提出了外承载结构稳定的条件和巷道围岩稳定的条件，探讨了内承载结构促使外承载结构稳定的机理。 - An elastic-plastic theoretical model of circular roadways considering the interaction between the inner and the outer bearing structure is presented, based on which the expressions of stress, displacement and the radiuses of the plastic zone and the loose zone in the surrounding rock are derived.
建立了圆形巷道内、外承载结构相互作用弹塑性理论模型，得到了围岩塑性区和破碎区半径、围岩应力及围岩位移的表达式。 - The temporal effects, the bearing capability, and the support effect of the inner bearing structures formed through bolt support, grouting, and brace support are analyzed. The influences of the cable on the inner and the outer bearing structures are analyzed.
分析了锚杆支护、注浆加固、支架支护等形式内承载结构的时间效应、承载能力和支撑作用效果；分析了锚索支护对内、外承载结构的作用。